The average price has decreased by -3.4 since last year. (1) The Bronco II 7.5 inch rear axle is ~1-5/8 inches wider than the Ranger 7.5 inch axle.Īll the additional width is in the passenger side. The average Ford Ranger costs about 29,325.50. the new rangers can even have a 16 rim on them from the factory. i want to have a set of tires mounted on rims ,so its an easy swap from off road tires to street run tires. i would stick with at least a 15 inch rim. Pinion length (axle centerline to u-joint centerline): i did notice that the older rangers that are 2wd have 14 inch rims. The Ford 7.50-Inch axle has a 5 x 4-1/2 Inch wheel bolt pattern. More if you have an aftermarket heavy duty cover.įord 7.5-Inch Axle – Specifications – Axle Shaft friction modifier to axles with limited slips)ĥ pints (expect to use 2-3 quarts if changing the fluid. Use hypoid gear lubricant SAE 75W80 or 80W90 (Add 2 oz. Specifications:įord 7.5-Inch Axle – Specifications – Ring Gear & Differential Ranger/Bronco II shafts are frequently “pillaged” for use in converting a Mustang to five-lug wheels. These axle shafts are the same length as the axle shafts in the “Fox” (1979-1993) Mustangs EXCEPT that Ranger/Bronco II shafts are five-lug and Mustangs are four lug. Mustang Note: If you go to a salvage yard, you may find that the left side shafts have been removed from 1983-1992 Rangers and Bronco II’s. This means its wheel has a 5-lug pattern on a circle featuring 4.5-inch or. There is no difference between 7.5 & 8.8 axle shaft lengths provided you stay in the same year window. ATK Engines Remanufactured Crate Engine for 1991-1994 Ford Ranger & Aerostar with 3.0L V6. The 1983-1988 Ford Ranger had a lug and bolt pattern of 5×4.5(5×114.3mm). On ALL Ranger/Bronco II’s the drivers side axle shaft is longer than the passenger side. The drivers side shaft is the same length in either axle assembly. All of this additional width is on the passenger side. The right side Bronco II axle shaft is 1-5/8″ wider than the 1983-1992 Ranger shaft. This means that the an entire Ranger axle assembly from 1993-up is 2-inches wider than 1983-1992. The early 1983-1992 Ranger axles are 1-inch shorter than the 1993-up pieces (Both sides). People have asked about the widths of axle shafts to swap shafts from one axle to another.
0 Comments
Leave a Reply. |